How To Get Playdough Out of Carpet & Other Surfaces

Playdough and silly putties are great toys for children, especially those with creative minds. They allow kids to explore their imagination and creativity while having fun at the same time. However, like most things, there are downsides to playing with playdough.

The sticky substance can easily stick to clothing and furniture, making it difficult to clean up afterwards. This is why we’ve compiled a list of ways you can keep playdough off your floors, walls, and other surfaces around the house.

How to remove putty from clothes

Putty is one of those things that just seems like it belongs everywhere. You know what I mean — there are times when you find yourself digging around in your pocket because you lost something or trying to figure out where you left your keys. But once you do find it, it’s hard to get it off your hands without ruining your clothes.

Here are some tips on how to remove putty from clothing.

• Step One: Get rid of the stuff you don’t want to lose – If you’re looking to keep your clothes clean, start with the items that aren’t important enough to wear again — like your wallet, phone, glasses, etc. Once you’ve got everything else out of your pockets, take a look at your shirt. Is there anything stuck in there? Chances are, there’s putty somewhere.
• Step Two: Use warm water and soap – This isn’t exactly a scientific method, but it works pretty well. Take your shirt out of the washing machine and lay it flat on a towel. Then pour about half a cup of hot water over the entire surface of your shirt. Let it sit for ten minutes, and then use a toothbrush to scrub away the putty. Repeat this process three times.
• Step Three: Rinse and repeat – After you’ve done step two, rinse your shirt thoroughly under cold running water. Don’t worry too much about getting every single piece of putty off; you’ll probably still end up with a few small patches here and there. Your goal is to make sure that no trace of putty remains.
• Step Four: Dry it off – Lay your shirt inside out on another towel and let it air dry overnight. When you wake up, it should be completely dry.

Also Read: How to Get Stains Out of White Clothes Naturally

Scrape away any loose putty

Apply a generous coat of polyurethane to the entire area, making sure to cover all edges and corners. Let it dry for at least 24 hours before moving on to the next step.

Once the polyurethane has dried completely, apply another layer of polyurethane over the top of the first coat. Let it dry for an additional 12-24 hours before using the room.

If you have pets, you may need to add extra protection against scratches and scuffs.

Chill the putty in a bowl of ice water for 10 minutes

Remove from the ice bath and knead until pliable, about 5 minutes.

Roll out to 1/8-inch thickness on a lightly floured work surface. Cut with a round cutter 2 inches larger than your mold. Fit into molds. Let dry overnight at room temperature or up to 3 days in refrigerator.

Scrape away the hardened putty

The process is called “abrasion blasting” and it’s used to remove old paint, rust or other contaminants from metal surfaces. It can also be used to create a smooth finish on wood, concrete or brick.

Abrasive blasting uses high-pressure water jets that are shot at an angle into the material being blasted. The force of the jet breaks down the surface of the material, removing unwanted debris while leaving behind a smooth, even coating.

Blot any leftover stains with a damp cloth.

If you find a spot on your clothes or carpet, try using a cotton wool ball to soak up the excess liquid. This method works well for most types of stains, including coffee, tea, wine and red wine. However, avoid using vinegar or bleach because they could damage the fabric.

How to remove playdough from clothes

Putty is one of those things that seems like it shouldn’t work, but does. You know how sometimes you’re trying to do something really simple – say, pick up a glass of water – and you end up spilling half of it everywhere because you didn’t realize that there was already liquid inside the cup?

Well, putty is like that too. It’s sticky stuff that sticks to everything and makes cleaning super hard. But don’t worry – we’ve got some tips that’ll help you get rid of it once and for all.

• Step 1: Find out where the putty came from – If you bought it yourself, check the label. If someone gave it to you, ask them what brand it is. If you can’t find anything written on it, try asking around to see if anyone else knows what it is.
• Step 2: Check your laundry room – Laundry rooms are often full of stuff that gets stuck to clothes. Make sure your washing machine isn’t overflowing with dirty clothes and that your dryer doesn’t have a lot of lint buildup.
• Step 3: Take off your shoes – This might seem obvious, but we want to make sure that you’re taking off both pairs of shoes at the same time. If you take off just one pair, you won’t be able to figure out which side of the shoe had the putty on it. And if you take off one pair while wearing another pair, you could accidentally walk away with a piece of the putty still sticking to your foot.
• Step 4: Remove the socks – Once again, this might seem obvious, but you’d be surprised how many people forget about the sock. Just pull down the leg of your pants, slide your hand under the cuff, and gently pull the sock off.
• Step 5: Grab hold of the material – Now that you’ve removed the sock, grab onto the material underneath. Don’t use your hands; instead, use your fingers. They’re smaller and less likely to snag on whatever the putty is clinging to.
• Step 6: Pull it off – Keep pulling until you feel the putty come free. If you don’t, keep pulling harder. Sometimes you have to tug really hard to get it loose.
• Step 7: Throw it away – After you’ve gotten the putty off your shirt, throw it away immediately. There’s no reason to save it. Even though it looks like it’s harmless, it could actually cause serious damage to your body.

Also Read: How to Clean a Washing Machine Drain Pipe

How to remove putty from carpet

Putty is one of those substances you just don’t want to see in your house. It sticks to everything it touches, including carpets. You might think that you could just vacuum up the mess, but you’d be wrong.

Putty doesn’t come off easily. In fact, there are some things you can do to make it even harder to clean up. But, if you really want to get rid of the stuff, here are some tips on how to remove putty from a carpet.

Use soap and water

Soap and water is probably the best way to go about cleaning up a spill of putty. Start by soaking the area thoroughly in warm water. Then use a sponge or rag dipped in hot water to scrub away the putty. Be careful not to overdo it, though; too much scrubbing can damage your carpet.

Try rubbing alcohol

Rubbing alcohol works well for removing putty because it breaks down the chemical bonds holding the substance together. Just mix equal parts rubbing alcohol and water, and soak the spot.

Let the mixture sit for several minutes, and then rinse it off with plain tap water. This method won’t work on every type of putty, but it’s worth a shot.

Use a commercial cleaner

Commercial cleaners usually have ingredients designed specifically to break down putty. They’re often available at hardware stores and home improvement centers.

Follow the directions on the label carefully, and test a small amount first to make sure it will work before using it on an entire room.

Use a heat gun

Heat guns are perfect for melting putty. The heat melts the glue-like material, allowing you to scoop it up with a spoon. To use this technique, hold the heat gun close to the spot where the putty has accumulated. Keep the temperature low enough so that the putty stays melted, but high enough to melt the surrounding areas.

Use a blowtorch

A blowtorch heats up fast, which makes it ideal for melting putty. Hold the torch near the spot where the putt has collected, and move it around until the whole area is covered.

Use a hair dryer

A hair dryer can also be used to melt putty. Turn the air setting on high, and place the nozzle right next to the spot where the mess has gathered. Blow gently until the putty starts to soften.

Use a knife

A knife is another tool that can be used to cut through putty. Cut slowly and carefully, making sure to keep pressure off the surface below. Once you’ve removed as much of the putty as possible, scrape it up with a spatula.

How to remove playdough from carpet

Playdough is everywhere. Kids love playing with it, adults use it to decorate cakes and cookies, and even pets enjoy rolling around in it.

But sometimes playdough gets stuck inside carpets, rugs, and hardwood floors. If you’re wondering how to get playdough out of carpet, here are some tips to help you along the way.

Use a vacuum cleaner

You might think that vacuuming is too much of a hassle, but trust us — this method works best. A high-powered vacuum cleaner with a brush attachment will do the trick. You’ll want to look for one with a strong suction power and a soft bristle brush.

Try soaking it in water

This is another tried-and-true method. Fill a bucket half full of warm water, add about 10 drops of dish soap, and let sit overnight. In the morning, empty the bucket into the sink, rinse off the playdough, and repeat. Repeat as needed.

Mix baking soda and vinegar

Another easy solution is to mix equal parts of baking soda and white vinegar. Pour this mixture onto the playdough and wait 30 minutes. Then, scrub away!

Use a toothbrush

Toothbrushes are great tools for cleaning sticky messes like playdough. Simply dip your toothbrush in the mixture, and sweep it across the affected area.

Use a wet rag

Wet rags are useful for getting rid of any kind of sticky mess. Dip a cloth in hot water, wring it out, and apply directly to the affected area.

Use rubbing alcohol

Rubbing alcohol is a powerful solvent, and it’s safe to use around children. Just pour a little bit over the playdough, rub it in with your hands, and then wipe it up.

How to get putty and playdough off your children

Playdough and putty can be difficult to clean up. However, there are three easy ways to get them out of kids’ hair.

1. Shampooing – This method works best when you use shampoo designed specifically for kids. If you’re unsure about what type of shampoo to buy, try one with a low pH level. A pH level of 8 is ideal.
2. Conditioner – Try applying some conditioner to wet hair and combing it through. Then rinse thoroughly.
3. Blow drying – Another option is blow drying. You’ll want to make sure you’ve got plenty of ventilation around the room while doing this. Also, make sure you don’t have any sharp objects lying around.