How to Clean a Washing Machine Drain Pipe

| |

As an Amazon Associate I earn from qualifying purchases.

If you’re looking for the answer to how to clean washing machine drain pipe blockage? You’ve landed to the right place.

Washing machine drains are one of those things you never think about cleaning. But just like every other part of your home, washing machines require regular maintenance to keep working efficiently.

If your drain hose isn’t draining properly, there could be several reasons for clogged washing machine drain.

In this article, you’re going to learn how to clean washing machine waste pipe without calling professional plumbers.

Keep reading…

How Do I Clean My Washing Machine Drain?

If you have a washing machine that has a drain pipe, it is important to clean the drain regularly. This will prevent clogs, bad smell and other problems from occurring in your home’s plumbing system.

If you are not cleaning out your washer drain filter on a regular basis, then you may be causing damage to your washing machine drain hoses over time.

Before you start, you’ll want to make sure that you’re dealing with a normal, standard model. If you’re working with a front-loading washer or a top-load washer, you won’t be able to access the washing machine drain line like you can with most models.

In addition, if you’re dealing with a top-loader, there are additional steps involved in cleaning out the pipes.

You’ll need to locate the drain hose pipe. This is typically located near the bottom of the machine, though it could vary depending on the specific model. To check, look for a hole near the bottom of the tub that leads into a small opening.

If you see a little door attached to the side of the tub, you’ve found the drain. Remove the door and pull out the drainpipe. Then, follow the directions above to clean it.

Make sure that there isn’t anything blocking the drainage pipe. If there are minor clogs like clothing or toys stuck inside the machine, you might need to take the door off to access it.

Then, check around the bottom of the machine to see if there’s something lodged in the drain pipe.

A common culprit is hair or lint that gets caught in the pipes during use. Remove any debris that might block the flow of water out of the machine.

You’ll then need to disconnect the drain pipe from the machine. This is typically done by pushing down on the handle to release it. Once you’ve removed the pipe, wrap a towel around it to catch any liquid that leaks out.

Place the towel underneath the machine to soak up excess moisture. Take care not to touch the metal parts of the machine while handling the pipe.

Once you’re finished cleaning the drain pipe, reattach the pipe to the machine and reconnect the faucet. Turn the machine on and let it run for several minutes to flush out any remaining residue.

Also Read: How to Clean Invisalign

How to Clean Washing Machine Drain Using a Drain Snake

If you’re having trouble getting the drains in your washing machine unclogged, you might want to try using a drain snake. These are long metal tubes that fit into your sink or bathtub drainage system and help dislodge debris.

They come in different sizes depending on how large your pipes are, and there are many models on Amazon.

Before inserting the snake, make sure to turn off the faucet and check that no one is standing nearby. Then, follow these steps to clean your washing machine drains.

  • Turn off the power to the washing machine.
  • Remove the cover plate from the bottom of the drainpipe.
  • Insert the end of the drain snake into the opening where the drainpipe meets the waste pipe.
  • Twist the snake to loosen any debris, and then push it down the pipe, working it around gently.
  • Pull the snake out of the drainpipe once you find a spot where there is no resistance.

How to Clean a Washing Machine Drain Using a Drain Cleaner

If you’re looking for a way to clean your washing machine drain without having to call plumbing professionals, there are some DIY solutions you can try.

One of the most popular ways to do this is to use a chemical drain cleaner. This type of product works by dissolving solid material such as hair and soap scum, and it’s usually safe enough to use around plumbing fixtures.

You’ll find plenty of commercial cleaners products like this online or at hardware stores, but here are three things to keep in mind:

  • Follow the directions carefully. Some enzyme cleaners contain chemicals that are corrosive or caustic, so read the label to ensure that you know how much to add and what precautions to take.
  • Use caution when pouring the solution down the drain. Make sure that you don’t spill anything onto the floor or carpeting, and avoid splashing it while standing near the sink. If you accidentally splash yourself, wash the area immediately with clean water.
  • Don’t overdo it. Chemical drain cleaners aren’t meant to replace professional maintenance, so don’t assume that one application will solve the problem. Leave the job to experienced plumbers whenever possible.

Also Read: How to Clean a Clear Phone Case That Turned Yellow

How Do You Clean a Smelly Washing Machine Drain?

Washing machines don’t always smell great, especially if you live in a busy household where there are lots of people doing laundry.

But it doesn’t take long for dirty clothes to build up in the machine and start stinking out the place with bad odors. And while some odors might just be part of the process, others could indicate a bigger issue.

If the smell is coming from the drain, either of the following cleaning methods should help you to get rid of smelly drains.

First, try pouring boiling hot water into the drain to loosen whatever is stuck in there. Next, use a wire brush to clear away any lint or hair that might be blocking the drain.

Finally, pour a mixture of baking soda and white vinegar down the drain to neutralize any residual odors.

However, bear in mind that no matter how hard you scrub, sometimes washing machines still stink. So if the smell persists, check the vents and the drum area of the machine to see if anything else needs cleaning.

How Do I Unclog a Washing Machine Drain?

The most obvious sign of a clogged washing machine drain is water spilled out of the machine when you open it.

But there are other signs that something is wrong too. For example, if you find a strong odor emanating from the machine, especially if it smells like rotten eggs, you might want to check whether the drain has become clogged.

However, you may notice an even stronger stench wafting into the house when you open the door. This is usually caused by a blockage somewhere else in the plumbing system.

So, what happens next?

Well, if you think that you need to call a plumbing company as they might have right plumbing tools to take care of things, you’re probably correct.

After all, if you’ve got an overflowing sink or toilet, you know how much trouble it can cause.

But if you’re still unsure about calling someone, you can try the above tips to help yourself to unblock a washing machine drain yourself.

Also Read: How to Clean Bong Properly At Home [Ultimate Guide]

Amazon and the Amazon logo are trademarks of, Inc, or its affiliates.


How to Clean Gold Jewelry at Home

Does Cotton Shrink? How to Prevent Cotton from Shrinking


1 thought on “How to Clean a Washing Machine Drain Pipe”

Comments are closed.