How to Clean Your Washing Machine – 5 Actionable Tips You Must Follow!

| |

As an Amazon Associate I earn from qualifying purchases.

The best thing about owning a washing machine is how easy it makes life. You don’t have to do much maintenance, just put in a load of laundry every now and again and you are good to go. But what happens when you forget to wash your clothes properly? Or worse still, when you neglect to clean the inside of the drum? Learn how to clean the washing machine like a pro by following the below-mentioned steps:

If you want to avoid having to buy a new one, here are some simple ways to keep your old one running smoothly.

  1. Keep the water level low. If there isn’t enough water in the tub, the agitator won’t spin around and everything will be stuck in place. This could lead to damage to the motor.
  2. Use warm water. Cold water tends to cause lint build-up and can make the machine work harder to agitate things out.
  3. Make sure that there aren’t too many items in the machine. A full load might mean that the drum fills up quickly, making it hard to agitate anything else. Try putting less stuff in the machine to start with.
  4. Don’t use fabric softener. Fabric softeners contain chemicals that can affect the performance of your machine. They can even clog the drain.
  5. Avoid overloading the machine. Overloading the drum can cause the washing machine to wear down faster.

How to Clean a Front Load Washer

The best way to keep your washer smelling nice is to clean it regularly. This includes cleaning the inside of the tub, where most odors are generated. You’ll want to make sure you’re getting rid of any excess lint buildup. To do this, run the agitator around the bottom of the tub once or twice, and then turn off the motor. Then, use a soft brush to scrub away any buildups. If you don’t feel comfortable doing this yourself, ask someone else to help. They can get into places you can’t reach easily.

Next, take a sponge and wipe down the sides of the tub. Make sure to avoid the drain holes, since those are usually covered up by a mesh screen. Also, check the lid seals. These are often located near the door opening. If there are any leaks, try tightening the screws holding the lid in place.

Once you’ve cleaned everything, rinse the entire washer thoroughly. Use cold water, and let it run for 10 minutes or longer. Afterward, dry the washer completely. For best results, use a towel to blot the surface. Don’t forget about the filter. Be sure to change it every six months or sooner.

If you notice any unusual smells while running the wash cycle, stop immediately. This could indicate a problem with the pump or a leaky seal.

How to Clean a Top Load Washer

Cleaning a top load washing machine isn’t difficult, but it does require some patience. If you’re looking to do the job yourself, here’s how to go about it.

First, clean the washer’s tub. This step is important because dirty water could damage the motor and cause serious problems down the road. To make sure everything is spotless, use a sponge and warm water. Then, pour a small amount of dish soap into each tray. Let it sit there for five minutes. After that, rinse out the trays and let them dry completely.

Next, clean and soak your washer’s removable parts. Start with the door gaskets. Remove the door panels and wipe away any residue. Rinse off the rubber seals and let them dry. Next, clean the agitator basket and spin cycle lid. Use a damp microfiber cloth and mild soap to scrub away any grime. You want to avoid harsh chemicals that could harm your washer. Finally, wash the lint filter and spin cycle cover. Wipe them down with a soft towel and let them air dry.

Now that you’ve cleaned every part of your top loader, it’s time to start the actual washing process. Pour a small amount of liquid detergent into the dispenser. Add enough so that the level reaches just below the overflow hole. Run the agitator around several times to distribute the detergent evenly throughout the tub. Once you’ve done that, fill the tub halfway with cool water. Turn on the machine and let it run through its cycles. When all is said and done, empty the tub and rinse it thoroughly.

How to Clean the Washing Machine Tub

Wash your laundry like a pro with our step-by-step guide for cleaning a washing machine. You’ll learn everything you need to know about what parts are inside a washing machine and how to clean each one.

You’ll find out how to clean the drum, the spin basket, the agitator, the door gasket, the drain pump, the detergent dispenser, and even the lid seal. We’ve got tips for every type of washer, including front-loaders, top-loaders, and even those big commercial machines.

We’re sharing the best ways to clean your washing machine tub because we want you to enjoy a spotless washing experience. But don’t worry — we won’t make you scrub hard enough to hurt yourself. Instead, we’ll show you how to do things gently and safely.

Clean the Washing Machine Door or Lid

The door on your top load washer is one of those things you might notice once in a while but never really think about cleaning. But there are some easy ways to keep it clean. Here’s how:

  1. Remove the access panel covering the bottom of the door. You’ll find a grommet where the handle attaches. Pull out the grommet and wipe away the dirt and grime using a microfiber cloth.
  2. Use a soft brush to scrub off the soap scum and residue left behind by previous loads.
  3. Clean the rubber gasket around the door. A toothbrush works great. Just make sure you don’t use too much pressure or you could break the seal.
  4. Wash the lid. Take the lid off and give it a good scrubbing with a sponge or rag.
  5. Rinse the entire lid thoroughly. Let it dry completely before replacing it.

Clean Detergent Trays, Washer Parts, and Surfaces

If you’re having trouble getting a stubborn stain out of your clothes, try soaking them in warm water with a few drops of dishwashing liquid. This helps loosen the dirt and grease, making it easier to rinse away. You can also use a little baking soda to help break down tough stains like blood and grass.

For hard-to-remove lint and dust bunnies, pour some rubbing alcohol into a spray bottle and mist the inside of the machine. Let the solution sit for 10 minutes, then wipe dry. For stubborn spots, add a drop or two of dishwashing liquid to a bowl of warm water and soak the area overnight. Rinse thoroughly in the morning.

To prevent buildup, make sure to empty the detergent compartment regularly. Also, check the manufacturer’s instructions to see what type of detergent is recommended. Some machines require specific types of detergents; others are designed to work with multiple kinds.

Clean the Washing Machine Drum

To fully deep clean a washing machine’s drum, you’ll need to take apart the machine. First, unplug it. Then, remove the front panel. Next, pull out the door panels. You’ll find the drum assembly inside. Remove the belt cover and the drum itself. Use a brush to scrub the drum. Rinse off the drum and wash the entire drum assembly with hot water. Clean the filter and agitator separately. If your washing machine doesn’t have an agitator, consult your owner’s manual to learn how to remove the filter.

Once everything has been cleaned, replace all parts except the drum. Plug the machine back in and test run a cycle.

How to Clean Your Washing Machine’s Dryer

Dryers are different from other appliances in that they don’t come with a built-in way to clean themselves. However, most models include removable filters and vents that can be removed easily. To clean these components, follow these steps:

Remove the vent cover. Wipe away any debris. Replace the vent cover.

Remove the lint trap. Wipe away any remaining debris. Replace the lint trap.

Wash the filter. Pour 1 cup of vinegar into the dryer and let stand for 30 minutes. Drain the vinegar and repeat this process until no more odor remains.

Rinse the filter and dry.

Some Home Remedies to Completely Clean your Washing Machine

1. How to clean washing machine with vitamin C

There are two main ways to go about trying to get rid of buildup in your washing machine. One is with an alkaline solution, like baking soda, while the second is an acidic one, like citric acid. While both work well, there is another way to do things that we think might just be better.

The first thing you’ll want to do is check out our guide on how to test your washing machine for hardness levels. This will tell you exactly what type of water your machine needs to operate properly. Once you know what type of water your washing machine requires, you’ll be able to find some great solutions to help keep it running smoothly.

If you’re looking for something a little less chemical, here’s what you can do:

  1. Dissolve 50g of baking soda into 2 liters of hot tap water. Make sure the mixture is completely dissolved before adding it to the washing machine.
  2. Add the diluted baking soda to the drum of your washing machine. Let it sit for around 30 minutes, and then run a cycle through. After that, rinse the machine thoroughly with hot water.
  3. For stubborn stains, add a few drops of lemon juice to the drum of your machine and let it soak overnight. Rinse out the next day, and repeat steps 1 and 2.
  4. To prevent limescale build-up, use vinegar to clean the inside of your machine. Simply mix equal parts of white vinegar and warm water together, pour it into the drum of your machine, and let it stand for 10 minutes. Then wash as usual.

2. Clean a washing machine with white vinegar and soda crystals

If you’re having trouble getting stains out of your laundry, try adding a few drops of white vinegar to your detergent. This trick works because vinegar creates bubbles that help loosen stubborn dirt and grime stuck to fabric fibers.

To use the method, simply fill up one of your detergent trays with water and let it sit overnight. In the morning, drain off the excess water and replace it with some white vinegar. Add a couple of tablespoons of the crystals recommended above and mix well. Run the wash on the hot cycle and see what happens!

3. How to get rid of limescale or soap scum in the washing machine

White vinegar is one of those household staples you never think about. But it really does work wonders when it comes to getting rid of limescale build-up in your washing machine. A simple solution like this will keep your machine running smoothly for longer and save you money over the long term.

4. Cleaning your washing machine with Epsom salts and vinegar

You’ve probably heard about how great Epsom salts are for bathing, but did you know that they’re also a wonderful cleaning solution for your washing machine? In fact, there are many reasons why you should use Epsom salts in your laundry room. Here are some of them:

  1. They clean without chemicals
  2. They don’t dry out clothes as detergent does
  3. They help keep your washing machine running smoothly
  4. They make the load smaller
  5. They don’t damage fabrics
  6. They’ll kill bacteria
  7. And they’re super cheap

Epsom salts come in a variety of forms, including powder, flakes, and liquid. You can find them easily online or in most grocery stores. Once you start using them, you won’t want to live without them again.

5. Try these smelly washing machine home remedies

Washing machines are notorious for giving off foul odors, but there are some things you can do to help keep yours smelling fresh. If your machine doesn’t smell like roses, here are 14 tips to make sure your washing machine is always ready for action.

  1. Get rid of lint buildup. Lint builds up quickly in washing machines and can cause odor problems. Use a lint roller to remove the excess fluff.
  2. Keep the lid closed while running the cycle. This prevents moisture from escaping and drying out the interior of the machine.
  3. Make sure the temperature setting is set correctly. A high-temperature setting will dry out clothes faster, causing mold growth.
  4. Check the washing machine filters regularly. Dirty filters can clog drains and cause sewage backups. Cleaning the filter every three months is recommended.
  5. Wash whites separately. Washing white clothing in the same load as colored items can lead to color bleeding.
  6. Add soap to detergent. Detergents without added soap can strip the oils needed to prevent stains.

My number One washing Machine maintenance Tip?

Last but not least, here is how I maintain my washing machine. Always check the level of water in the tub before starting the wash cycle. The amount of water used during the wash cycle depends on the size of the load (the weight of the clothes) and the type of fabric being washed. For example, if you have a large load of towels, you may need more water than if you were washing a small load of shirts.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.

Previous

Curtain Cleaning in 2022-Everything You Need to Know

MrBeast Net Worth 2022: How He Gained 100 Million Subscribers?

Next
Tweet
Share
Share
Pin