How to Clean Bong Properly At Home [Ultimate Guide]

How to Properly Clean Any Type of Bong

Bongs come in various shapes and sizes, from simple glass pipes to elaborate pieces of art. They also vary in price depending on their size and materials. If you want to get the most out of your bong, then you should invest some time cleaning your dirty bong properly.

Cleaning your bong is important because it helps prevent mold growth and other bacteria build-up. This is especially true if you smoke weed regularly. The longer you leave your bong uncleaned, the higher the chances of mold growing inside.

In this article, you will learn how to clean a bong a right way.

How to Properly Clean Any Type of Bong

To clean a glass bong properly, gently shake it upside down and pour some rubbing alcohol into the bottom chamber. Next, add about one teaspoon of fine sea salt per quart of rubbing alcohol and stir well.

Let the bong sit overnight and drain off the liquid during the next day. Repeat this process twice more, letting the bong dry completely each time.

Next, fill the bong with hot tap water and let it cool down. Once it reaches room temperature, carefully pour out the water and replace it with cold tap water.

Repeat this step three times to make sure there are no residual chemicals left behind. Finally, rinse the bong thoroughly under running water.

How Often Should You Clean a Bong?

Most experts agree that you should clean your bongs after a few days to one week of use. You must also replace your water often, ideally after each smoke session, to avoid the growth of mold.

Any bong water that sits in the bowl of a water pipe is at great risk of molding, and once mold forms, it’s nearly impossible to remove without destroying the piece.

Cleaning a bong is a lot like cleaning anything else in your home: it needs to be done regularly and thoroughly to ensure safety and hygiene.

However, some people think that cleaning a bong only requires a quick wipe over with a wet cloth and clean water. But that doesn’t mean that you shouldn’t clean your bong every day!

If you want to deep clean your bong, you can do so roughly once a week. Simply pour some rubbing alcohol into the bowl, wait 10 minutes, and then drain it.

Rinse the outside of the bong with boiling hot water, again waiting 10 minutes. Allow the bong to air dry completely and store it somewhere safe.

To clean bong effectively, you’ll need to remove the bowl and wash it thoroughly. Then, soak the bowl in hot water for at least 30 minutes before rinsing it off. Finally, dry the bowl using a towel or paper towels.

The most important thing about cleaning bong is to make sure that the bowl isn’t full of debris like dried cannabis leaves, stems, seeds, or burnt tobacco. If there are no particles left in your bong, you can safely assume that it’s ready to go again.

However, if you find yourself smoking out of a bong that still smells of bong weed, it’s best to give it a thorough cleaning.

The easiest way to do this is to soak the entire piece of glassware in warm water overnight. This will allow the water to penetrate into the nooks and crannies where the residue gets trapped.

When you take the bong out of the fresh water, wipe down the outside of the glass with some alcohol wipes to remove any remaining oils or dirt that might have accumulated while soaking. You may also use bong cleaner to clean bong.

Next, fill up the bong with filtered water and let it sit for a couple of minutes. Then turn off the tap and let the water run freely over the sides of the glass for five to ten seconds. Finally, rinse the whole thing under running water and repeat the process once more.

While you’re waiting for the water to drain completely, put some baking soda in the bottom of the bowl and light it on fire. Once the flames die down, pour the hot water through the bong and wait for it to cool down. Now you’re ready to smoke again.

Also Read: How to Clean Stomach Instantly [Ultimate Guide]

How to Clean Latex or Acrylic Bongs

Latex, plastic, and acrylic bongs come in many shapes and sizes. While some people use them simply for smoking weed, others prefer to make elaborate designs and intricate patterns.

Regardless of what type of bong you choose, you want to keep it clean and sanitized. Here are some tips on how to clean acrylic bong with household items.

First, rinse the bong with warm water, soap or you can also use white vinegar. Be careful not to scrub too hard or scratch the surface of the material. Instead, rub the inside of the bong with a soft cloth or cotton swab.

Next, fill it with hot water and let it sit until the heat has dissipated. Remove the bong from the water and set it aside to cool.

When it’s cool enough to touch, wipe down the inside of the glass with an alcohol-based cleaner. Make sure to get every last bit of gunk out of the joint and water stains.

Finally, rinse the bong under running water and dry it using a towel. You may also need to apply a coat of silicone spray to prevent the bong from getting sticky.

How to Clean a Silicone Bong

Silicone bongs are great because they’re super lightweight and easy to clean. And while there are some things you can do to keep your silicone bong looking like new, most people end up having to throw it away eventually.

So how do you know what to do once your silicone bong starts looking dirty?

We’ve got you covered.

Start by rinsing the bong with warm soapy water or white vinegar. Use a toothbrush, pipe cleaners or a soft bottle brush to gently scrub the interior of the silicone. Rinse the bong well after each pass.

Once the bong is thoroughly cleaned and water stains faded, wipe down the exterior of the silicone with an alcohol-based cleanser. Let the silicone air dry before storing it somewhere safe.

If you notice any holes or cracks in your silicone bong, don’t worry about it. Just patch those up with tape.

How to Clean Your Quartz Bong

Quartz bongs aren’t as durable as other types of bongs. But if you treat them right, they’ll serve you well for years to come. The first step in keeping your quartz bong clean and free of germs is to wash it with warm soapy water and a dishcloth.

After washing the bong through the dirty bong water and let it dry completely. If you plan on storing your quartz bong, wrap it in paper towels and place it in a sealed container.

You should also avoid exposing your quartz bong to direct sunlight. Heat can damage the delicate inner workings of your quartz bong, which could lead to cracking or breaking.

How to Clean Glass Bongs

Glass bongs are made from either clear or colored glass. Clear glass bongs are easier to clean than colored ones. That’s because colored glass tends to have more impurities in it, making cleaning harder.

To start, rinse your glass bong with warm soapsuds. Then, let it dry completely before wiping down the outside with an alcohol-based wipe surge.

To clean the inside of your glass bong, use a wet rag or sponge dipped in warm water and mild detergent. Wipe down all parts of the bong, including the stem and bowl. You can also use a bong cleaning solution, if you have one.

When you’re done, rinse the bong again with warm soapsuds and allow it to dry completely. Don’t forget to store it some where safe where it won’t be exposed to direct sunlight.

How to Clean Plastic Bongs

Plastic bongs are relatively easy to clean. All you really need to do is take apart the pieces and give them a good cleaning.

The best way to disassemble a plastic bong is to unscrew the top cap. Once that’s removed, you’ll see two halves of the bong. Remove the bottom half of the bong and then remove the stem assembly.

Next, soak the entire piece in warm soapy water. Scrub any dirt off the sides of the bong using a soft toothbrush. Rinse the bong shapely and let it dry completely.

Now that the bong has been properly cleaned, you can put it back together. Screw the top onto the base and attach the stem.

How to Clean Metal Bongs

Metal bongs are probably the easiest type of bong to clean. They’re usually made from stainless steel or aluminum. You can easily get rid of any rust or stains by soaking the bong in hot soapy water.

Use a toothbrush to scrub the inside of the bong. Rinse the bong shapely and let it dry. You may also use lemon juice to clean a metal bong.

How to Clean Ceramic Bongs

Ceramic bongs are made from clay, porcelain, or stoneware. Because these materials tend to absorb odors, they’re ideal for smoking bong weed.

To clean your ceramic bong, just soak it in warm soapy water and scrub away. Afterward, rinse the bong shapely and let it dry.

If you want to keep your ceramic bong looking its best, don’t expose it to heat or moisture. This includes not letting it sit in the sun or near an open window.

How to Clean Silicone Bongs

Silicone bongs are one of the most popular styles of bongs today. Unlike other types of bongs, silicone bongs are designed to withstand extreme temperatures.

Silicone bongs are great for smoking weed because they’re lightweight and durable. To clean a silicone bong, simply wipe it down with a damp cloth.

Don’t use soap or abrasive cleaners on silicone bongs. Instead, use a damp towel.

How to Clean Wood Bongs

Wooden bongs are another type of bong that’s perfect for smoking weed. These bongs are typically made from wood, bamboo, or acrylic.

Wooden bongs are pretty simple to clean. Just wash them with warm soapsuds, let them dry, and polish them with a soft brush.

You can also use a damp cloth to wipe down wooden bongs. If you want to make sure your wooden bong looks its best, avoid exposing it to direct sunlight.

Final Thoughts!

The best way to clean your bong is to do it yourself. There are plenty of methods out there, but the most effective one involves a mixture of isopropyl rubbing alcohol and table salt or rock salt.

While many people think that cleaning your bong is just about rinsing out the bowl, there are actually several steps involved.

First off, make sure you’re using the correct type of glass. Silicone bongs, for example, require extra care because they don’t absorb water like traditional glass bowls do. Glass bongs, meanwhile, tend to hold onto particles better than plastic ones.

Next, you’ll want to rinse your bowl thoroughly. This helps remove any residue left over from previous sessions. To ensure that you’ve done a good job, take a look inside your bong. If you see any mold growing within, it might mean that you didn’t properly dry out the bowl before filling it up again.

Once you’re ready to begin cleaning, pour some warm water into the bottom of your bowl. Then add a small amount of dish soap, followed by a few drops of isopropyl rubbing alcohol.

You can also try adding a teaspoon of baking soda or lemon juice to help loosen dirt and grime. Once everything is mixed together, swirl it around with a spoon and let it sit for five minutes.

Afterwards, dump out the mixture and fill your bowl with cold water. Swirl it around to rinse away any leftover debris. Finally, run your bong under hot water for 20 seconds. Afterward, wipe it down with a towel and allow it to air dry completely.