As an Amazon Associate I earn from qualifying purchases.
Airpods are one of Apple’s most popular products, and while many people love them, others don’t like how difficult it is to clean them properly. With so much dust getting into them, it’s no wonder why some people end up with ear infections. There are many ways to clean Airpods, including soaking them in water, rubbing alcohol, and even hand sanitizer.
Apple recommends wiping down the exterior of your AirPods with a dry cloth. You can do this by hand or with a microfiber cloth, such as one used to wash clothes. If you want to keep the color of your AirPods looking great, avoid using any product that contains ammonia or chlorine bleaches.
You shouldn’t use a disinfectant on your AirPods, because doing so could damage the electronics inside. We recommend using a 70 percent isopropy alcohol wipe, 75 percent ethanol wipe, or Cloroxin Disinfecting Wipes. Don’t use any product that contains bleach or hydrogen peroxide, because those chemicals could harm the electronics inside your device.
Don’t use a chemical cleaner or soap on the knit mesh canopy or ear cushions of your Apple AirPods Max. This material is designed to resist liquids, so you won’t be able to clean it properly. Instead, we recommend using a damp cloth to wipe down the surface.
How to Clean AirPods Without Damaging Them
Here are some smart tips on how to clean Airpod ear wax at home.
1. Baking Soda Is Great For Cleaning Your Earbuds
First off, make sure you’re cleaning the inside of your Airpods. You won’t want to damage the case. To do this, simply take out the charging cord and put the buds in a bowl. Add about half a cup of baking soda and mix well. Let the mixture sit for 30 minutes. Then, rinse thoroughly under running water.
2. Use Hand Sanitizer Instead Of Alcohol
Another great way to clean your Airpods is to use hand sanitizer. Simply rub the inside of your case with the sanitizer and let dry completely. Once it’s dry, you can add a little bit of alcohol to help dissolve any residue left behind.
3. Rubbing Alcohol Works Well Too
Rubbing alcohol works very well too. Just remember to keep the amount low. If you overdo it, you could ruin the plastic. After placing your Airpods in a small bowl, pour rubbing alcohol directly onto them and give them a good rub. Make sure to wipe off the excess afterwards.
4. Soak Them In Water
If you have an iPhone XS, then you might not need to worry about cleaning your Airpods at all. The new model has a built-in waterproof feature that makes it easy to clean. Simply place your Airpods in the included case and fill it with warm water. Leave them there for 10 minutes before rinsing them off.
5. Use A Microfiber Towel
If you don’t own an iPhone XS, you can still get rid of the dirt from your Airpods. All you need to do is grab a microfiber towel and soak it in hot water. Place your Airpods in it and leave them there for 15 minutes. Then, remove them and gently pat dry.
6. Use Vinegar And Warm Water
Vinegar is another option if you don’t have access to a microfiber towel. Simply soak a cotton ball in vinegar and place it in your Airpods case. Allow it to sit overnight and then rinse away the residue.
7. Use Toothpaste
Toothpaste isn’t just for brushing teeth anymore! It also works as a great solution for cleaning your Airpods. Simply apply some toothpaste to a cotton swab and rub it around the inside of your case. Rinse it off after 5 minutes.
8. Use Lemon Juice
Lemon juice is another effective solution for cleaning your AirPods. Simply squeeze lemon juice into a bowl and dip your Airpods in. Wait for 20 seconds and then rinse them off.
9. Use Vinegar With Alcohol
This last solution is probably the most effective. Mix equal parts of white vinegar and rubbing alcohol together and place your Airpods inside. Let them sit for 2 hours and then rinse them off thoroughly.
10. Use Vinegar And Salt
You may think that salt will hurt your Airpods, but it actually helps loosen up the grime on your earbuds. Take a few drops of white vinegar and sprinkle some salt on top. Let sit for two hours and then rinse thoroughly.
11. Use Vinegar And Sugar
Mix one part sugar and three parts white vinegar together and allow it to sit for 24 hours. This should be enough time to dissolve the gunk on your Airpods.
12. Use Baking Soda
Baking soda is another simple solution that works wonders when it comes to cleaning your Airpods or other electronic devices. Simply mix baking soda with water and spray it on your Airpods or device. Allow it to sit for 30 minutes and then wash it off.
How to clean AirPods Pro
AirPods Pro are Apple’s latest wireless headphones. They’re smaller than their predecessors, and they come with a charging case. But despite being smaller, they’re no less durable. Here’s how to clean them properly.
1. Remove the Case
The first thing you’ll want to do is remove the case. There are four tiny screws holding the case together. You’ll find them right below the volume buttons. Once it’s removed, you can easily take out the AirPods themselves.
2. Clean Them Out
The next step is to give both sides of each AirPod a good wipe down. To start, use a soft cloth to wipe down the outside surface of the AirPod. Next, hold each side of the AirPod over a sink or basin and run under warm water. Make sure to turn the AirPod upside-down so that any excess water runs out.
3. Dry Them Off
Once everything has been cleaned, let the AirPods air dry completely before putting them back in the case. Don’t worry about getting every single drop of water out though. Just make sure that the AirPods are completely dry.
4. Put the Case Back On
Finally, put the case back on the AirPods and reattach the four tiny screws. The case itself doesn’t need to go back on until you’ve finished using the AirPods. That way, you won’t accidentally spill anything on them.
5. Charge Them Up
When you’re done using the AirPods, charge them up by placing them in the included charging case. Doing this will ensure that they stay charged throughout the day.
6. Store Them Safely
When you’re not using the AirPods for an extended period of time, store them safely away from children and pets. If you have kids, keep them in a drawer at home or in a safe at school.
7. Keep Them Clean
To help prevent damage to your AirPods, don’t leave them lying around in plain sight. Instead, keep them stored in a bag or box. Also, avoid touching the rubber portion of the AirPods as much as possible.
How to clean AirPods Max
Apple’s new AirPods Max are larger than their predecessor, and they come with an extra set of batteries. These features mean that they’re more expensive than their predecessors, but they also mean that they require a bit more care. Here’s how to get them looking like brand new again.
1. Remove The Case
Like its smaller cousin, the AirPods Max come with a removable case. It’s held onto the AirPods by four small screws. Start by removing these screws. Then, carefully pull the case apart.
2. Give Each Side A Good Wipe Down
Next, give each side of the AirPods a good wipe down. This ensures that there’s no dirt or dust stuck between the two halves of the AirPods.
3. Use A Soft Cloth
Use a soft cloth to gently rub the inside of each half of the AirPods to remove any residue.
4. Let Them Air Dry
After cleaning, allow the AirPods to air dry completely before putting the case back on. This prevents moisture from building up inside the case.
5. Recharge Them In Time
If you’re going to be using the AirPods frequently, consider buying a battery pack. They’ll ensure that you always have enough power to listen to music or talk to Siri.
6. Store Your New Batteries Safely
If you’re storing your AirPods in a place where little hands might reach, invest in a hard plastic storage case. These cases are designed to protect your AirPods while keeping them scratch free.
7. Avoid Touching The Rubber Portion Of The AirPods
The AirPods Max feature a flexible rubber section. While it feels nice against your skin, it can easily become dirty if you touch it too often.
How to clean an AirPods case
AirPods cases aren’t exactly known for being easy to clean. But, if you want to keep your AirPods looking great, you should know how to do it properly.
1. Take Off The Case
First things first: take off the case. You can either use the provided screwdriver or just pop the case open. Either way works fine.
2. Get Rid Of Any Sticky Residue
Once the case is removed, start wiping down the outside of the case. Use a damp cloth to remove any sticky residue.
3. Wash The Inside
Finally, wash the inside of the case. To do so, fill the case with warm water and add some soap. Make sure that the case is fully submerged. Soak the case for about 10 minutes.
4. Rinse And Repeat As Needed
Rinse the case out thoroughly after washing. Don’t worry about getting every last drop of water out; this will only make the case harder to clean later.
5. Dry It Out
When the case has dried, put it back together. Press the two halves firmly together until all traces of water are gone.
6. Put It Away
Store the case somewhere safe. If possible, store it away from kids and pets.
Are AirPods waterproof?
No, but they’re pretty close. Like most other wireless headphones, the AirPods are not waterproof. However, they are splashproof. That means that they won’t break if you accidentally spill something on them.
How to get water out of AirPods
If you happen to spill something on your AirPods, don’t panic! There’s a simple solution. First, turn the AirPods upside-down. Next, shake them vigorously. Finally, let them sit for about 30 seconds. After that, rinse the AirPods under running water.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.